Page 1 of 1

fault codes Vr6

Posted: Mon Mar 05, 2012 10:14 pm
by 38
01251 - Fuel Injector for Cylinder 3 (N32)
31-10 - Open or Short to Ground - Intermittent
01252 - Shareware Version. To Decode all DTCs
31-10 - Please Register/Activate - Intermittent
01247 - Shareware Version. To Decode all DTCs
31-10 - Please Register/Activate - Intermittent
01253 - Fuel Injector for Cylinder 5 (N83)
31-10 - Open or Short to Ground - Intermittent
01254 - Shareware Version. To Decode all DTCs
31-10 - Please Register/Activate - Intermittent
Readiness: N/A


What could this possibly be?

Re: fault codes Vr6

Posted: Tue Mar 06, 2012 6:55 am
by MK2 G60
Check the injectors and there wires between the injector and ecu as well as the 12v supply for the injectors.

Re: fault codes Vr6

Posted: Tue Mar 06, 2012 8:35 am
by 38
I will check the connectors and all of the above. I bought this engine recently so its possible that there could be some old muck inside the connectors.This motor probably stood for 10 years or so.

I cant seem to find my old motors wiring harness. I want to swop the injectort rails harness and see if that makes a difference.

Thanks

Re: fault codes Vr6

Posted: Tue Mar 06, 2012 8:49 am
by vr6zn
you did check that the engine you bought is obd2?

Re: fault codes Vr6

Posted: Tue Mar 06, 2012 9:20 am
by Yakuza Racer
vr6zn wrote:you did check that the engine you bought is obd2?
yes is an OBD2 motor