Knocking sound from front

[KaRBoN85]

Good day all.
I really need some help. I had some work done on my Jetta at Supaquick and I think they screwed something up .
I had Shocks, Control Arm bushes and ball joints all replaced.
On collection of my car they tell me that both my front bearings need to be replaced.
I disagree, I am used to worn bearings humming not knocking. It sounds almost rubbery when the Moise starts and it only happens when I turn.
Further on that my ASR and ABS lights are now on.

Any ideas where I should look for the issue will be greatly appreciated.

[Ashveer03]

Noise probably from the shock saddle and bearing. Most likely fitted incorrectly.

Have someone turn the steering while u look at the spring. The bearing is meant to allow the strut to turn easily without binding or jamming.

Sent from my CPH2371 using Tapatalk

[KaRBoN85]

Noise probably from the shock saddle and bearing. Most likely fitted incorrectly.

Have someone turn the steering while u look at the spring. The bearing is meant to allow the strut to turn easily without binding or jamming.

Sent from my CPH2371 using Tapatalk

Will do so. Much appreciated.

[KaRBoN85]

Noise probably from the shock saddle and bearing. Most likely fitted incorrectly.

Have someone turn the steering while u look at the spring. The bearing is meant to allow the strut to turn easily without binding or jamming.

Sent from my CPH2371 using Tapatalk

Ding Ding Ding! Was exactly that. Well the bearing supplied did not have a bearing installed. It had to be purchased separately