mr turbo help

[ob wan]

morning

need the help of the guru's here please

installed a mr turbo ecu on a mk2 abf, got a 9a dizzy, car started and ran fine, it's a single coil&dizzy ecu

now i can't get a signal to the ecu, when i remove the dizzy and turn it by hand, i can hear the injectors pulsing and the fuel pump pumping
when i put the dizzy back in the car, nothing, earths are fine and terminals are tight

help please

[ob wan]

problem found, power drop when starter engages...

[Viper]

Eish that's a tuff one. Maybe something earth related. I never had that problem before. I always go for 60-2 setups

Sent from my SM-G930F using Tapatalk

[ob wan]

turned out to be the relay in the mr turbo wiring harness,

now i don't have spark....

[ob wan]

replaced tp100 and all is well now

[Timjive-o]

turned out to be the relay in the mr turbo wiring harness,

now i don't have spark....

Howzit man just need to know which wires go to the relay on the Mr turbo efi box loom from the connector. Like terminal 30,85,86,87 which wires goes to each terminal from the efi box loom connector to the relay