Dicktator Injector Wiring

[Pynoxim]

I know this may have been answered before, but I'd just like to confirm something. Dicktator batch fires all injectors at the same time if I'm correct? So wiring the Injector negative to any two injectors will work fine regardless of which two they are eg. 1-4 and 2-3 or 1-2 3-4 etc.

[panic-mechanic]

yes.

[Pynoxim]

Panic... You're the man, thanks

[Chanky]

Hi sorry to just hop on your topic but I need some help with my 60-2 setup.


Sent from my ConeXis X2 using Tapatalk

[Pynoxim]

Sure, what assistance do you require

[Chanky]

I have a v5 jetta it had in a 2.3l engine but I fitted a 2l apk engine with a 60-2 management but my problem is that my oil light and revcounter don't work the guy that fitted the management can't seem to get the stuff working.

Sent from my ConeXis X2 using Tapatalk

[panic-mechanic]

The oil light ain't working becuase the rev counter ain't working. And it going to be fun to make the rev counter work right.
It is calibrated frona 5 cylinder and you are now running a 4 cylinder.
Interestingly if you has used Perfect Power xms5 you have sorted that. They have a rev counter out that can be adjusted to give an offset.
Anyways your installer should try to get the original management pin out and see what the rev counter wire was and connect that up.
IF the guys was clever and has left the stock management box in place why does he not just T the original box into the 60-2 pickup which will know the engine is running and provide the rpm readout.

[Pynoxim]

The Mk4 Cluster gets its RPM signal directly from the original ECU via CANBUS. That being said, you can use a Citi Golf Shurlock box and the RPM output of the Dicktator to get things working. So RPM output from the Dicktator into the Shurlock Box RPM input which then sends information to the cluster via CANBUS. I've posted a Shurlock Box pinout on the forum somewhere.

[Chanky]

Hi thanks guys for the replies but my does not have the v5 Ecu in bought the car with out one so how do I go about it now.

Sent from my ConeXis X2 using Tapatalk

[panic-mechanic]

See pynoxim's answer......

[Dunga88]

Hi anyone here has a idea to wire up the injectors wiring for Nissan hardbody 3.3L VG33? I have a diagram but it's seems very. Can someone please help me with a drawing sketch anything might be a help

NB diktator wasted spark