Hey guys.
I've got a stock standard jetta 1.8 16v. The starter's solenoid has two spade connectors. One is the signal from the ignition switch and the other spade (15a) is for the cold start injector if I'm not mistaken.
Can you use a replacement starter that has only one spade connection on the solenoid for this car?
How would you wire the cold start connection(number 15a) on it?
Jetta cli 16v starter wiring
-
- Enlisted
- Posts: 45
- Registered for: 16 years 4 months
- Location: Mosselbay
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Jetta cli 16v starter wiring
by simply adding a relay that is activated by the signal wire and that powers the one to the cold start injector
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.