Hi Gents,
Very noob question but I want to attemp to DIY fitting the metal windage tray/ oil restrictor in my Citi.
I’m just abit uncertain as to wether the sump gasket should go first on the block then the windage tray and lastly the sump?
Or is it first the windage tray then gasket and sump.
Any advice would be appreciated
Oil Restrictor fitment
- panic-mechanic
- Panic's Place
- Posts: 26715
- Registered for: 21 years 8 months
- Membership No: 79
- Location: Benoni, putfontein.
Re: Oil Restrictor fitment
Most windage trays are basically the gasket. So no need for an additional gasket. Does it have a rubber around the edge?
Stephan van Tonder - Jhb - Putfontein Benoni
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
'05 Audi A6 3.0L TDI Avant
'09 Touareg 3l TDI
'13 VW CC 2l tdi (repair project)
'05 Touareg v10
Perfect Power dealer. I do dyno tuning.
-
- Enlisted
- Posts: 16
- Registered for: 5 years 1 month
Re: Oil Restrictor fitment
Yes it does. Wasn’t sure but thank you panic