Asz engine torque settings
-
- Enlisted
- Posts: 3
- Registered for: 5 years 1 month
Asz engine torque settings
Hi guys i want to know what will the torque settings be on my asz engine ....i need the big ends setting...all head bolts settings including camshaft settings please guys if any one maybe know
-
- Lieutenant
- Posts: 1621
- Registered for: 7 years 1 month
- Car Make: VW
- Car Model: Polo 9n 1.9 TDI Sportline
- Location: Durban
Re: Asz engine torque settings
Big ends - 30nm + 90 deg. new bolts
Headbolts - 40nm+40nm+90deg+90 deg. New bolts
Cam cap - 8nm+90deg. New bolts
Rocker shaft - 20nm+90deg. New bolts
Sent from my EML-L29 using Tapatalk
Headbolts - 40nm+40nm+90deg+90 deg. New bolts
Cam cap - 8nm+90deg. New bolts
Rocker shaft - 20nm+90deg. New bolts
Sent from my EML-L29 using Tapatalk
When a car tailgates me, i slow down - then floor it and give them a cloud of diesel smoke to choke on
- BIGMIG
- Porra Love
- Posts: 3226
- Registered for: 14 years 1 month
- Car Make: VW
- Car Model: 9N3 GTB22/60vk Sportline
- Membership No: 1574
Re: Asz engine torque settings
I’m not stripping goose but interested in how this torque will be applied. Am I correct in thinking like this.
Headbolts - 40nm tighten all in the correct sequence then come back to the beginning and add another 40nm to the original 40nm to make the total 80nm and repeat the sequence. Then back to start add 90 deg then back again fo a final 90 deg?
Headbolts - 40nm tighten all in the correct sequence then come back to the beginning and add another 40nm to the original 40nm to make the total 80nm and repeat the sequence. Then back to start add 90 deg then back again fo a final 90 deg?
- BIGMIG
- Porra Love
- Posts: 3226
- Registered for: 14 years 1 month
- Car Make: VW
- Car Model: 9N3 GTB22/60vk Sportline
- Membership No: 1574
Re: Asz engine torque settings
One setting is incorrect, second step.
This is as folllows from my Haynes owners workshop manual.
Cylyinder head bolts
All engines except code ASY:
Stage 1 = 40
Stage 2 = 60
Stage 3 = Angle-tighten a further 90 degrees
Stage 4 = Angle-tighten a further 90 degrees
Engine code ASY
Stage 1 = 35
Stage 2 = 60
Stage 3 = Angle-tighten a further 90 degrees
Stage 4 = Angle-tighten a further 90 degrees
Will also add
10nm on the tappet cover bolts, they don’t have to be renewed.
This is as folllows from my Haynes owners workshop manual.
Cylyinder head bolts
All engines except code ASY:
Stage 1 = 40
Stage 2 = 60
Stage 3 = Angle-tighten a further 90 degrees
Stage 4 = Angle-tighten a further 90 degrees
Engine code ASY
Stage 1 = 35
Stage 2 = 60
Stage 3 = Angle-tighten a further 90 degrees
Stage 4 = Angle-tighten a further 90 degrees
Will also add
10nm on the tappet cover bolts, they don’t have to be renewed.
-
- Lieutenant
- Posts: 1621
- Registered for: 7 years 1 month
- Car Make: VW
- Car Model: Polo 9n 1.9 TDI Sportline
- Location: Durban
Re: Asz engine torque settings
Sorry, was a typo
Sent from my EML-L29 using Tapatalk
Sent from my EML-L29 using Tapatalk
When a car tailgates me, i slow down - then floor it and give them a cloud of diesel smoke to choke on