Hopefully this will help someone struggling.if you need any advise feel free to ask im sure alot of guys here are pros with this.
Sent from my SM-J200F using Tapatalk
8v dicktator wiring diagram without tp100
- mike65
- Cadet
- Posts: 115
- Registered for: 8 years 10 months
- Car Make: vw
- Car Model: mk1
- Location: south africa-port elizabeth
8v dicktator wiring diagram without tp100
Watch this space
- PapaJo
- Brigadier
- Posts: 6990
- Registered for: 14 years
- Car Make: VW's
- Car Model: '16 7R, '86 Caddy AUM 20VT
- Membership No: missing
- Location: Meyerton or Offshore Guyana.
Re: 8v dicktator wiring diagram without tp100
Awesome, Mike65.
- mike65
- Cadet
- Posts: 115
- Registered for: 8 years 10 months
- Car Make: vw
- Car Model: mk1
- Location: south africa-port elizabeth
Re: 8v dicktator wiring diagram without tp100
No problem papajo. Just would like to help others where i can and also need help from other in my next setup and just sharping my overall knowledge on both wiring and mechanical
Watch this space
-
- Enlisted
- Posts: 2
- Registered for: 5 years 3 months
- Car Make: VW
- Car Model: 79 MK1 Golf
- Location: Johannesburg
Re: 8v dicktator wiring diagram without tp100
Hi Guys, does anyone have a picture of the idle stabilizer?
My car has the 8 pin TPS, and I'm struggling to figure out the wiring for the dicktator,
My car has the 8 pin TPS, and I'm struggling to figure out the wiring for the dicktator,
-
- Enlisted
- Posts: 2
- Registered for: 5 years 3 months
- Car Make: VW
- Car Model: 79 MK1 Golf
- Location: Johannesburg
Re: 8v dicktator wiring diagram without tp100
I found a video online and the guy said these wires are for the 8 pin TPS, but the idle is horrible and it revs up on its own,
PIN1- +12v (Pin 8 on Dicktator)
PIN2- IDLE Control Negative (Pin 18 on Dictator)
PIN3- Not Used
PIN4- +5v (Pin 14 on Dicktator)
PIN5- TPS Signal (Pin 3 on Dicktator)
PIN6- Not Used
PIN7- Ground (Pin 9 or 10 on Dicktator)
PIN8- Not Used
PIN1- +12v (Pin 8 on Dicktator)
PIN2- IDLE Control Negative (Pin 18 on Dictator)
PIN3- Not Used
PIN4- +5v (Pin 14 on Dicktator)
PIN5- TPS Signal (Pin 3 on Dicktator)
PIN6- Not Used
PIN7- Ground (Pin 9 or 10 on Dicktator)
PIN8- Not Used
- PapaJo
- Brigadier
- Posts: 6990
- Registered for: 14 years
- Car Make: VW's
- Car Model: '16 7R, '86 Caddy AUM 20VT
- Membership No: missing
- Location: Meyerton or Offshore Guyana.
Re: 8v dicktator wiring diagram without tp100
Check out the Dicktator manual. It gives you the basic setting explanation and then you work it out from there. Important to have the minimum opening and home position set to get a stable idle.MerlinShane wrote: ↑Tue Mar 28, 2023 9:15 pm I found a video online and the guy said these wires are for the 8 pin TPS, but the idle is horrible and it revs up on its own,
PIN1- +12v (Pin 8 on Dicktator)
PIN2- IDLE Control Negative (Pin 18 on Dictator)
PIN3- Not Used
PIN4- +5v (Pin 14 on Dicktator)
PIN5- TPS Signal (Pin 3 on Dicktator)
PIN6- Not Used
PIN7- Ground (Pin 9 or 10 on Dicktator)
PIN8- Not Used